Step Size

Suggest a new features or improvements that you want to see in future versions.
Post Reply
bis4brass
Posts: 29
Joined: Wed Feb 04, 2015 9:56 pm

Step Size

Post by bis4brass »

I can click on any performer and see their step size from the previous set. Could this information be made available to the performer on the dot sheet? I think this would speed the learning process...

Thanks! Ryan
William
Posts: 620
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Step Size

Post by William »

Hi bis4brass,

That is a great idea, I'll add it to the requested features list.

Have a great day!
William Lee
-----------------
CEO
Box5 Software
https://box5software.com
Jeremy G
Posts: 8
Joined: Mon Sep 03, 2012 10:08 pm

Re: Step Size

Post by Jeremy G »

Any update on this?
William
Posts: 620
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Step Size

Post by William »

Hi Jeremy,

This feature has slipped through the cracks, but since you bumped it and it will be fairly easy to implement I am going to do it right now and make it available for the next release.

Have a great day!
William Lee
-----------------
CEO
Box5 Software
https://box5software.com
martijn_kng
Posts: 12
Joined: Wed Dec 14, 2016 10:19 am

Re: Step Size

Post by martijn_kng »

Hi all,

Wouldn't it be much more easy to use a less technical stepsize description.
What do we try to tell with 6-5 or 18-5??
I believe when we talk about small, normal / regular or big stepsize and halt that this is much more readable for the performers.

How to implement this? I think this can be on the same basis as the dot sheet editor. Some of us want to use the technical data and use the actual stepsize measurements. I prefer to group these into small (stepsize 15 or higher), normal/regular (stepsize 7-8), medium (stepsize 9-14) or big (stepsize 5-6).

Have a great day!
Attachments
dot sheet.png
dot sheet.png (1.6 MiB) Viewed 15788 times
William
Posts: 620
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Step Size

Post by William »

Hi martijn,

This seemed like a good idea and fairly simple so I went ahead and made the change. It will be available in the next release of EnVision.
Screen Shot 2020-06-05 at 9.02.24 PM.png
Screen Shot 2020-06-05 at 9.02.24 PM.png (1008.39 KiB) Viewed 15785 times
William Lee
-----------------
CEO
Box5 Software
https://box5software.com
martijn_kng
Posts: 12
Joined: Wed Dec 14, 2016 10:19 am

Re: Step Size

Post by martijn_kng »

Hi WIlliam,

Wow what a quick respons and result :-)

Thank you very much!!

Have a nice day.

Greatings Martijn
Post Reply