Turn Performer over "X" counts

This room is designated for designers of all skills and backgrounds to share information, tips, ideas and concepts with each other.
Post Reply
DunBone
Posts: 2
Joined: Sat Aug 05, 2017 5:56 pm

Turn Performer over "X" counts

Post by DunBone »

Can't figure out how to turn my performers in place. I'd like them to turn from the away sideline to home sideline over "x" number of counts. Perhaps this is called a "slow-turn" or an "8 count turn" if done in 8 counts.
bis4brass
Posts: 29
Joined: Wed Feb 04, 2015 9:56 pm

Re: Turn Performer over "X" counts

Post by bis4brass »

No problem, easy to do.

Select the performers you want to execute the turn. For this to be stationary turn, you will need to use two sets (or subset). Make sure the performers are in the same dot from (as an example) set 1 to set 2 (or 1A).

Go to the performance detail tool. From there you can change the performers facing by varying degree for each count in the time line.

Hope this helps.
William
Posts: 620
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Turn Performer over "X" counts

Post by William »

Hi DunBone,

bis4brass is right in the technique to do what you are asking.

To expand a bit, there is no way to smoothly turn performers over X number of counts so you have to do it the way bis4brass describes. When performers turn it is always instant. What you are asking for is a feature that is on our todo list so you can expect it to come at some point in the future.

Have a great day!
William Lee
-----------------
CEO
Box5 Software
https://box5software.com
DunBone
Posts: 2
Joined: Sat Aug 05, 2017 5:56 pm

Re: Turn Performer over "X" counts

Post by DunBone »

Thank you!
Post Reply