EnVision Updates

Find out about upcoming updates from the Box5 team. If it's not posted here; it's a rumour.
William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Thu Dec 12, 2013 12:43 pm

Hi Everyone!

EnVision version 1.6.00 is now available!

EnVision v1.6.00 Updates:
  • Added the new Dot Sheet Tool. This tool allows you to view dot sheets, change the size of the font and choose between printing and saving to a PDF file! This tool is available via Print Mode.
  • Added grid markers in 2D/3D modes for Custom Canvas types.
  • Added previous and next counts to each line of the dot sheets.
  • Fixed lower body facings not displaying in the Count Editor.
  • Moved the canvas image option to the top of the Canvas Editor and fixed a crash when trying to load an file that wasn't an EnVision Canvas file.
  • Fixed step off animations on subsets.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Tue Jun 03, 2014 1:05 am

Hi Everyone!

This post is extremely late, for which I apologize.

EnVision version 1.7.04 is now available!

EnVision v1.7.04 updates:
  • Changed default performer labels so there are no more duplicates.
  • Fixed Custom Canvas numbering alignment in Print Mode.
  • Fixed grid align depth for custom canvases.
  • Fixed uniforms not loading the next time the file is opened
  • Fixed small translation issues for Dot Sheets
  • Fixed EnVision not being able to be run on OSX 10.5.
  • Performers without equipment! Both Sally and James can now perform without any equipment!
  • Added the Rehearsal Mark Letters to dot sheets and printouts for easier reference.
  • Reorganized and improved the Printout view. More information and easier to read!
  • Align the horizontal grid lines against any custom point. If you write close to the hash you can make the grid align against that or you can center it for custom canvases!
  • Switched the \"Prepend Set\" and \"Subset\" buttons in the timeline for better temporal cohesion.
  • Play All! You can now easily play the entire production via the new Playback menu! You can also use the shortcut ctrl-shift-p.
  • Align the first set with the beginning of the music! This makes it much easier to re-sync sets that have been moved to be before the music starts. See this new feature in the Sync Music tool.
  • Slow the zoom down by holding ctrl while scrolling the mouse wheel! Makes positioning the zoom in print mode much easier.
  • Choose the performer label colour for 2D and 3D mode! This affects all performers equally but can be very helpful if you have a black canvas where the labels get lost.
  • Text box changes! Copy and paste text boxes with text, font, size and location!
  • Paste text boxes to every page at once! Good for a small notes template that you will use on every page.
  • Fixed the Multi-Use markers in the timeline when the jumped to 0 when certain tools where open.
  • Stopped the playback range from jumping around when starting and stopping playback.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Wed Jun 04, 2014 11:59 pm

Hello Everyone!

EnVision version 1.7.05 is now available!

EnVision v1.7.05 updates:
  • Added an exit button to the license wizard.
  • Fixed panel hiding issue when using a Chinese system.
  • Fixed a couple crashes when undoing deleted sets.
  • Revert tool now ensures all paths are set to straight line paths when reverting.
  • Fixed a crash on OSX when openening the color selector in the Groups tool.
  • Fixed transparent polygon edges in Windows.
  • Fixed rehearsal mark letters turning to symbols after getting to Z.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Fri Nov 07, 2014 12:41 am

Hello!

EnVision version 1.7.12 is now available!

I forgot to post the last couple rounds of updates so they are here as well.

EnVision v1.7.10 updates:
  • Added much more customization to the Custom Canvas Numbering
  • Fixed tooltips not being displayed on Mac.
  • Fixed subsets not showing the right counts on dot sheets.
  • Fixed last page of dot sheets not saving to PDF.
  • Fixed some small issues surrounding lower body animations.
  • Fixed Help URL going to the wrong webpage.
  • Fixed the block form on Mac.
  • Fixed a crash when opening some Form Tools.
  • Fixed a crash selecting a performer to follow from the camera menu.
EnVision v1.7.11 updates:
  • Can now edit the thickness of the Canvas outline in Print Mode.
  • Fixed some errors in the Uniform Editor on Mac.
  • Took the data folders that are written to (such as Uniforms) and moved them to the Documents/EnVision directory
  • Fixed an issue where performers would stop marching and glide at certain distances.
  • Fixed a crash when loading a custom canvas when the grid toggle was off.
EnVision v1.7.12 updates:
  • Fixed Ctrl-Tab switching between Performer mode and Form mode.
  • Win: Fixed performers printing as solid blocks on Windows.
  • Fixed text boxes not rendering properly when saving as a PDF.
  • Mac: Fixed some issues on Mac when loading a texture manually.
  • Fixed flag edits not showing in main program until restart.
  • Fixed dot sheet grid name defaults not being translated. Use 'Reset Grid Names' to see the translations.
  • Fixed Performer animations slowing down on fast computers.
  • Fixed some bugs around exporting and importing.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Mon Jun 08, 2015 3:28 am

Hello Everyone!

EnVision version 1.7.16 is now available!

I apologize but I've missed a couple updates again, here are the changes.

EnVision v1.7.14 updates:
  • Added the ability to add textures to the sides of props!
  • Defaulted the playback range to encompass the entire production so you can play the whole production as soon as you load it. Useful when trying to play the drill for others.
  • Fixed the Apple Magic Mouse scrolling issues.
  • Fixed a crash when copying and pasting text boxes in print mode.
  • Fixed the corrupt update issue on Windows.
  • Added Chinese character support to PDFs.
EnVision v1.7.15 updates:
  • Updated the way the software updater works.
EnVision v1.7.16 updates:
  • Move selected performers with arrow keys. They move one grid length per press.
  • Use keyboard shortcut to navigate sets and subsets: Ctrl-[ and Ctrl-] (Cmd on Mac).
  • Paths are now coloured by step size! Step sizes above 6 to 5 (2.5' per step) are Yellow and they grade through Orange to Red at 4 to 5 (3.75' per step). Smaller steps are also coloured from light Grey for very small steps up to Blue-Grey for bigger steps. This feature can be turned off from the new toggle in the toggle toolbar.
  • Added toggle buttons for selection type.
  • Fixed an issue with the Text Boxes in Print mode.
  • Fixed a crash when closing from thetaskbar on OSX.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Sun Jul 05, 2015 10:33 pm

Hello Everyone!

EnVision version 1.7.17 is now available!

EnVision v1.7.17 updates:
  • Allow Forms to me moved with the keyboard arrow keys like Performers.
  • Select groups by double clicking on the list in the Groups tool.
  • F5-F12 Camera shortcuts now switch to 2D or 3D mode automatically.
  • Sped up some calculations such as for the Dot Selection tool.
  • Fixed the issue where Performers don't respond to keyboard input all the time.
  • Made some changes to speed up the workflow.
  • Fixed a bug where Rotate and Follow the Leader tools weren't adding performers to subsets.
  • Fixed the Prop side images being drawn backwards.
  • Fixed several issues related to Switching Performers shuch as Performers detaching from Forms, Performers switching Equipment, and Performers appearing on the wrong dot.
  • Fixed issue where Step Timing is lost when Reverting.
  • Fixed issue where you aren't asked to save
    when loading a drill from the Recent File menu
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Mon Jul 27, 2015 12:53 am

Hello Everyone!

EnVision version 1.7.19 is now available!

EnVision v1.7.19 updates:
  • Fixed the issue where the 2 button didn't work in the text boxes any more.
  • Ensured that PDF files have the "pdf" extension when they are saved.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Sun Sep 13, 2015 2:38 pm

Hi Everyone!

EnVision version 1.7.21 is now available!

EnVision v1.7.21 updates:
  • Fixed an issue where deleting a production would overwrite the previous production.
  • Fixed an issue where the info panel didn't show subset path sizes.
  • Disabled Tempo selection for Subsets in the Set Tool.
  • Fixed an issue on the dot sheets where the Cts.In were not printing for the first set of a new page.
  • Fixed an issue where creating a subset before an existing subset would mess up the path information and cause strange behaviour.
  • Fixed a crash when attempting to create a different production where there were events on the last set.
  • Fixed a bug where selecting all performers or forms via Ctl+A didn't update open tools.
  • Disabled moving performers with the keyboard when in Print Mode.
  • Made panning in Print Mode a lot smoother.
  • Made sure Performers draw above props when in Print Mode so props can be used as tarps.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Thu Nov 05, 2015 11:42 pm

Hello Everyone!

EnVision version 1.7.22 is now available!

EnVision v1.7.22 updates:
  • Introducing Prop Cutouts! Use the alpha channel in an image (png) to create props with any 2D shape you like! Choose the 'Cutout' option from the 'Prop Type' drop down in the Props Tool.
  • Fixed a bug where the count pictogram in Print Mode was pushed off the page when using certain page sizes.
  • Fixed an issue where the Switch Performer tool left the timeline in a locked stated after it was closed.
  • Fixed a crash on exit when closing the Props Tool after having a 3D model loaded.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

William
Posts: 432
Joined: Mon Jun 20, 2011 2:59 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: EnVision Updates

Post by William » Wed Dec 23, 2015 5:07 am

Hi Everyone,

EnVision version 1.7.24 is now available!

EnVision v1.7.24 updates:
  • Fixed music synchronization issues. Note that you may have to re-sync your music after this update.
  • Fixed issue where 'Y' did not display for performer labels in 3D/2D mode.
  • Fixed issue on OS X where the Choose Font dialog box failed to open.
  • Fixed a bug where undoing/redoing a subset add during a follow the leader didn't reset the paths properly.
  • Fixed issue where deleting the last production from your Production list in Show Manager caused a crash.
  • Fixed the Cymbal texture not being displayed properly.
  • Fixed some issues around selecting a 3D model for your props.
William Lee
-----------------
Director of Product Development
Box5 Software
http://www.box5software.com

Post Reply